Net Weight: 45g
Size: 4.8cm (W) x 5.5cm (H)
Color: Silver
Material: Major in Alloy
Number of LED per
Lamp: 4 LEDs
Color of Light: 6000--6500k
Cold White
Beam Angle: 60˚±5˚
Lamp Base is MR16 with GU5.3 Base
Suitable for residential and commercial use!
Brightness of 4W LED light = 50W Halogen incandescent Light
This LED lamp generate much less heat than traditional lamp
>90% Energy Save = 90% Money Save Max Capacity: 40Kg
Suitable for residential and commercial use! Such as, entertainment lighting,
architectural lighting, city beautification, portable lighting, Illumination and
decoration at home and public areas.
Direct replace your old halogen lamp in your existing light system as it work on
AC 12V and DC 12V. (Most traditional halogen incandescent lamp use AC 12V)
This LED lamp generate much less heat than traditional halogen, filament lamp
during operating, that's mean you save more on Air Condition. (It will be a bit
of hot during operating, but the degree of hot is you can still holding it on
hand without hurt. Unlike filament or halogen lamp, they will burn your skin
instantly while operating. However, if you using the LED lamp in an enclosed
fixtures with dead air, it will / may shorten the life of the LED lamp.)
Note:
This LED lamp CANNOT work on AC 110V or AC 220V.
This LED lamp work with all types of magnetic transformers but not all
electronic transformers, because many electronic transformers require a minimum
load higher than 4 watt. So we recommend you check your fixture track and change
power LED power supply if necessary. When you find the LED lamp flickering or
even go out after just a few second, that's mean your transformer is not fit.
Also, many Track Light power supplies will produce voltages as high as 16 with
low loading or no loading (LED lamps provide very low loading). You must make
sure that the voltage of your existing power supply does not exceed 14 Volts
with the LED bulbs installed. The easiest way is test your transformer with a
multi-meter in prior.
|